INVESTIGATION OF REMESHING PARAMETERS FOR DEVIATION ANALYSIS IN REVERSE ENGINEERING
DOI:
https://doi.org/10.32972/dms.2024.004Keywords:
reverse engineering, remesh, stl, deviation analysis, surface roughnessAbstract
The use of additive manufacturing technologies in industry is increasingly common, particularly with the emergence of Industry 4.0. These technologies can produce parts quickly and efficiently, but they also place higher demands on the quality of the manufactured products. The layer-by-layer processes create an anisotropic material model, which complicates component sizing. While the topic has been extensively researched, surface anisotropy has received less attention. The surface quality of a product may be affected by various factors, including the file conversion process or the staircase effect generated by the technology. Manufacturing parameters, such as layer thickness and orientation, can also have an impact. This paper focuses on the impact of reverse engineering step adjustment on surface quality.
References
Ahn, D., Kweon, J.-H., Kwon, S., Song, J., & Lee, S. (2009, 8). Representation of surface roughness in fused deposition modeling. Journal of Materials Processing Technology, 209(15-16), 5593-5600. https://doi.org/10.1016/j.jmatprotec.2009.05.016
Albert, J., & Takács, Á. (2023). Additív gyártás biomimetikai megközelítéssel. GÉP, 74(4), 9-12.
Dömötör, C. (2023). Reconstruction of Simple Parts Using FDM Technology. Design of Machines and Structures, 13(2), 13-21. https://doi.org/10.32972/dms.2023.013
Ficzere, P., & László, N. (2023). Surface Modification Methods of Plastic Components Produced by Additive Manufacturing: A Review. Design of Machines and Structures, 13(2), 53-68. https://doi.org/10.32972/dms.2023.017
Hanon, M., Alshammas, Y., & Zsidai, L. (2020, 5). Effect of print orientation and bronze existence on tribological and mechanical properties of 3D-printed bronze/PLA composite. The International Journal of Advanced Manufacturing
Technology, 108(1-2), 553-570. https://doi.org/10.1007/s00170-020-05391-x
Jin, Y.-a., Li, H., He, Y., & Fu, J.-z. (2015, 10). Quantitative analysis of surface profile in fused deposition modelling. Additive Manufacturing, 8, 142-148. https://doi.org/10.1016/j.addma.2015.10.001
Kónya, G., & Ficzere, P. (2023). The Effect of Layer Thickness and Orientation of the Workpiece on the Micro- and Macrogeometric Properties and the Machining Time of the Part during 3D Printing. Periodica Polytechnica Mechanical
Engineering, 67(2), 143-150. https://doi.org/10.3311/PPme.21473
Kónya, G., & Ficzere, P. (2024). The Effect of Layer Thickness and Orientation of 3D Printed Workpieces, on The Micro- and Macrogeometric properties of Turned Parts. Acta Polytechnica Hungarica, 21(2), 231-250. https://doi.org/10.12700/APH.21.2.2024.2.13
Kovács, N., & Kovács, J. (2008). Developments in the Field of Rapid Prototype Production. Materials Science Forum, 589, 421-425. https://doi.org/10.4028/www.scientific.net/MSF.589.421
Makkai, T., & Sarka, F. (2023). CAD Modelling of a Milling Insert. Design of Machines and Structures, 13(2), 81-92. https://doi.org/10.32972/dms.2023.019
Pandey, P., Venkata Reddy, N., & Dhande, S. (2003). Improvement of surface finish by staircase machining in fused deposition modeling. Journal of Materials Processing Technology, 132(1-3), 323-331. https://doi.org/10.1016/S0924-
(02)00953-6
Pérez, C. (2002). Analysis of the surface roughness and dimensional accuracy capability of fused deposition modelling processes. International Journal of Production Research, 40(12), 2865-2881. https://doi.org/10.1080/00207540210146099