Development of desktop 3D printer
DOI:
https://doi.org/10.32972/dms.2020.009Keywords:
3D printer, FDM, microcontrollerAbstract
In this paper, we present the design and construction of a rapid prototyping machine based on FDM (Fused Deposition Modeling) technology and the results of the test pieces made with it. The design basis of the machine was provided by an existing ISEL 5D milling machine, from which the two axes realizing the orientation movements were removed, and then the motion control of the three axes realizing the linear movements was realized with an Arduino Uno microcontroller. With the completed 3D printer, we printed test pieces from different raw materials and printing parameters during the testing, the results of which are reported.
References
The Ultimate Guide to Stereolithography (SLA) 3D printing. White paper, Marc 2017, www.formlabs.com.
Takács, Gy., Zsiga, Z., Makó, I., Hegedűs, Gy. (2011). Methodical design of production equipment. Budapest, Hungary, Nemzeti Tankönyvkiadó, 187 p. (in Hungarian).
Jakab, E., Takács, Gy., Hegedűs, Gy. (2002). Measuring station concepts for welded earthmoving-machine arms. GÉP, 53, 6–7, pp. 45–48, 4 p. (in Hungarian).
Hegedűs, Gy. (2003). Application of methodical machine design in the development of an industrial measuring machine. PhD Students Conference 2002, Section publication of the Faculty of Mechanical Engineering, Miskolc, Hungary: University of Miskolc Innovation and Technology Transfer Center, pp. 98–103, 6 p. (in Hungarian).
Takács, Gy., Patkó, Gy., Csáki, T., Szilágyi, A., Hegedűs, Gy. (2006). Development of Mechatronic Systems at the Institute for Mechatronics at the University of Miskolc. 2006 IEEE International Conference on Mechatronics, pp. 326–331. https://doi.org/10.1109/ICMECH.2006.252548
Hegedűs, Gy., Barak, A., Barna, B., Demeter, P., Simon, G., Szilágyi, A., Takács, Gy. (2010). Development of analyzing equipment of the remanent lifetime on roller bearings. MicroCAD 2010: XXIV. microCad International Scientific Conference, Section L, Machine and structure design, Miskolc, Hungary: University of Miskolc, pp. 47–52.
Szabó, K., Takács, Gy., Hegedűs, Gy., Tóth, S. G. (2019). Examination of Design Methodology of Screw Conveyors. Design of Machines and Structures, 9, 1, pp. 58–63. https://doi.org/10.32972/dms.2019.007
