Dynamical Simulation of a CNC Turning Centre
Survey Paper
DOI:
https://doi.org/10.32972/dms.2020.018Keywords:
rotor systems, turning center, Transfer Matrix MethodAbstract
This paper shows the most common rotor systems which can be used to analyse a CNC turning center. Starting with the simplest rotor system representation (single-degree-of-freedom) up to analysing multi-degree-of-freedom and infinite-degree-of-freedom rotor systems using the TMM (Transfer Matrix Method) when it comes to cases like multi desk rotors and Jeffcott-rotors.
References
Holub, M., Blecha, P., Bradac, F., Marek, T., ZAK Z. (2016). Geometric errors compensation of CNC machine tool. Modern Machinery (MM) Science Journal, pp. 1602-1607. https://doi.org/10.17973/MMSJ.2016_12_2016194
Hadas, Z., Vetiska, J., Juriga, J., Brezina, T. (2012). Stability analysis of cutting process using of flexible model in ADAMS. Proceedings of 15th International Conference Mechatronika, 5-7 Dec 2012
Brezina, T., Hadas, Z., Vetiska, J. (2011). Using of Co-simulation Adams-Simulink for Development of Mechatronic Systems. 14th International Conference Mechatronika, 1-3 Jun 2011 https://doi.org/10.1109/MECHATRON.2011.5961080
Fortunato, A., Ascari, A. (2013). The virtual design of machining centers for HSM: Towards new integrated tools. Mechatronics, Vol. 23, Issue 3, https://doi.org/10.1016/j.mechatronics.2012.12.004
Glasgow, D. A. Nelson, H. D. (1980). Stability analysis of rotor-bearing systems using component. Transactions of the ASME Journal Mechanical Design, Vol. 1, 102, https://doi.org/10.1115/1.3254751
Tiwari, R. (2018). Transverse Vibrations of Simple Rotor Systems. Rotor Systems: Analysis and Identification. CRC Press, Taylor & Francis Group
Rao, J. (2011). Rotor Dynamics Methods. In: History of Rotating Machinery Dynamics, Altair Engineering, Chief Science Officer, https://doi.org/10.1007/978-94-007-1165-5
Saeed, N. A., Kamel, M. (2017). Active magnetic bearing-based tuned controller to suppress lateral vibrations of a nonlinear Jeffcott rotor system. Nonlinear Dyn, 90, https://doi.org/10.1007/s11071-017-3675-y
Tiwari, R. (2018). A Two-Disc Torsional Rotor System with a Stepped Shaft. In: Rotor Systems: Analysis and Identification. CRC Press, Taylor & Francis Group
Tiwari, R. (2018). Transverse Vibrations of Simple Rotor Systems. Rotor Systems: Analysis and Identification, CRC Press, Taylor & Francis Group
Tiwari, R. (2018). Rotor Systems: Analysis and Identification. CRC Press, Taylor & Francis Group
Behzad, M. (1994). Introduction. In: Transfer matrix analysis of rotor systems with coupled lateral and torsional vibrations. A degree of doctor of philosophy dissertation, University of New South Wales
Tiwari, R. (2018). Transverse Vibrations of Simple Rotor Systems. Rotor Systems: Analysis and Identification. CRC Press, Taylor & Francis Group
Genta, G. (2005). Transfer matrices approach. In: Dynamics of Rotating Systems. Springer Science + Business Media, Inc., 233 Spring Street, New York, NY 10013, USA
Vance, J., Zeidan, F., Murphy, B. (2010) Computer simulations of rotordynamics. In: Machinery vibration and rotordynamics. John Wiley & Sons, Inc., Hoboken, New Jersey, https://doi.org/10.1002/9780470903704
