Deviation from standards in relation to cylindrical gears with external straight teeth
DOI:
https://doi.org/10.32972/dms.2012.003Keywords:
tooth shape, tooth root curve, tooth root stress, asymmetric teethAbstract
In propulsion technique applied in every day practice the load of gears is usually one directional or two directional, but the stresses on the tooth sides are not the same degree. Numerous researches verify that departing from standard symmetric toothed wheels, the loading capacity of gears can be increased by asymmetric teeth. Effects of deviation from standard have numerous consequences, which have to be examined.
References
Gy. Erney: Fogaskerekek. Műszaki Könyvkiadó, Budapest, 1983.
Á. Zsáry: Gépelemek II. Nemzeti Tankönyvkiadó, Budapest, 1990.
A. Kapelevich: Geometry and design of involute spur gears with asymmetric teeth. Mechanism and Machine Theory 35 (2000), pp. 117–130.
V. Senthil Kumar–D. V. Muni–G. Muthuveerappan: Optimization of asymmetric spur gear drives to improve the bending load capacity. Mechanism and Machine Theory 43 (2008), pp. 829–858.
F. Karpat–S. Ekwaro-Osire–K. Cavdar–F. C. Babalik: Dynamic analysis of involute spur gears with asymmetric teeth. International Journal of Mechanical Sciences, 50 (2008), pp. 1598–1610.
N. L. Pedersen: Improving bending stress in spur gears using asymmetric gears and shape optimization. Mechanism and Machine Theory, 45 (2010), pp. 1707–1720.
O. Alipiev: Geometric design of involute spur gear drives with symmetric and asymmetric teeth using the Realized Potential Method. Mechanism and Machine Theory, 46 (2011), pp. 10–32.
Zs. Drágár–L. Kamondi: Nem szabványos alapprofilú fogaskerekek tervezésének kérdései. Géptervezők és Termékfejlesztők XXVII. Szemináriuma, Miskolc, 2011. november 10–11. GÉP, LXII., 2011/7–8., I. kötet, pp. 35–38.
Zs. Drágár–L. Kamondi: Design questions of gears with non-symmetric teeth. 13th International Conference on Tools, ICT-2012, Miskolc, Hungary, 27–28 March 2012, pp. 329–332.
Zs. Drágár–L. Kamondi: Szerszám-alapprofil leírása fogaskerekekhez analitikus geometria alkalamazásával. XX. Nemzetközi Gépészeti Találkozó. OGÉT 2012, Romania, Kolozsvár, 2012. április 19–22., pp. 105–108.
