Designing pneumatic circuit of a cheese slicer

Authors

  • Bence Balázs Lajos University of Miskolc, Institute of Machine and Product Design
  • László Kelemen University of Miskolc, Institute of Machine and Product Design https://orcid.org/0000-0002-3958-4942

DOI:

https://doi.org/10.32972/dms.2018.001

Keywords:

cheese cutter, pneumatic system, design, sizing

Abstract

The design of the cheese cutter system was the one of the project topics in the HEIBUS project in 2017. The task was the design of the pneumatic system, which is used by the machine. The easiest solving was made, which complete the demands, which the design stands up. After then the sizing of the main part of the circuit came and choosing the other parts. Some tests in finite element program were also made.

References

Gáspár, L. (1988). Tejtermék-feldolgozás munkavédelmi követelményei. Budapest: Népszava.

Depper, W. & Stoll, K. (1978). Pneumatika gyakorlatban. Budapest: Műszaki Kvk.

Fábry, Gy. (1995). Élelmiszer ipari eljárások és berendezések. Budapest: Mezőgazda.

Diószegi, Gy. (1984). Gépszerkezetek méretezési zsebkönyve. Budapest: Műszaki Könyvkiadó.

Peckner, D.-Bernstein,I. M. (1977). Handbook of stainless steels. New York: McGraw-Hill.

Downloads

Published

2018-05-31

How to Cite

Lajos, B. B., & Kelemen, L. (2018). Designing pneumatic circuit of a cheese slicer. Design of Machines and Structures, 8(1), 5–17. https://doi.org/10.32972/dms.2018.001

Issue

Vol. 8 No. 1 (2018): Design of Machines and Structures

Section

Articles