Application possibilities of 3D scanning and prototyping in the manufacturing of packaging tools: Case study

Ferenc Sarka; Zsolt Tóbis

doi:10.32972/dms.2017.007

Application possibilities of 3D scanning and prototyping in the manufacturing of packaging tools

Case study

Authors

Ferenc Sarka University of Miskolc, Institute of Machine and Product Design https://orcid.org/0000-0003-3136-4248
Zsolt Tóbis University of Miskolc, Institute of Machine and Product Design

DOI:

https://doi.org/10.32972/dms.2017.007

Keywords:

prototype milling machine, CAD, 3D scanning, packaging tools

Abstract

In this paper authors describe the results of an industrial based work. The task of the work was to make new packaging tools for different chocolate hollow figures. The packaging machine was manufactured in the former East Germany and new tools are not available now. Two types of packaging tools were made in this project. One type was “polishing trough”, the other type was lifting/pushing tool. In this paper the whole production of the mentioned tools are introduced from the design to the manufacturing.

References

Mikó, B.-Czövek, I.-Horváth, Á.: Investigation of Accuracy of 3D Scanning, microCAD International Multidisciplinary Scientific Conference. Miskolci Egyetem, 2017, pp D3-1. 7.

Downloads

Published

2017-11-30

How to Cite

Sarka, F., & Tóbis, Z. (2017). Application possibilities of 3D scanning and prototyping in the manufacturing of packaging tools: Case study. Design of Machines and Structures, 7(2), 20–30. https://doi.org/10.32972/dms.2017.007

Download Citation

Issue

Vol. 7 No. 2 (2017): Design of Machines and Structures

Section

Articles