Analytical and experimental techniques for chatter prediction, suppression and avoidance in turning: literature survey
DOI:
https://doi.org/10.32972/dms.2022.011Kulcsszavak:
Chatter, Vibration, Stability, Turning, SpindleAbsztrakt
Chatter is a self-excited vibration that takes place during turning operations. It is either to be avoided or reduced for its negative impact on the machine-tool, the work-piece surface finish, and the cutting tool life. A lot of research has been carried out in this domain to understand this phenomenon, which leads to finding ways to detect, identify, avoid, reduce, and control chatter in turning processes. In this paper, chatter research re-lated to turning processes is reviewed and summarized. The main goal of this review paper is to compare different chatter prediction, suppression, and avoidance techniques to find out the most effective technique, so a scope of a work related to turning processes chatter is defined.
Hivatkozások
Yan, B. – Zhu, L. (2019). Research on milling stability of thin-walled parts based on improved multi-frequency solution. The International Journal of Advanced Manufacturing Technology, Vol. 102, No. 1. https://doi.org/10.1007/s00170-018-03254-0
Wu, D. – Chen, K. (2010). Chatter suppression in fast tool servo-assisted turning by spindle speed variation. International Journal of Machine Tools and Manufacture, Vol. 50, Nr. 12. https://doi.org/10.1016/j.ijmachtools.2010.09.001
Otto, A. – Radons, G. (2013). Application of spindle speed variation for chatter suppression in turning. CIRP Journal of Manufacturing Science and Technology, Vol. 6, Nr. 2, https://doi.org/10.1016/j.cirpj.2013.02.002.
Hajikolaei, K, et. al. (2010). Spindle speed variation and adaptive force reg-ulation to suppress regenerative chatter in the turning process. Journal of Manufacturing Processes, Vol. 12, Nr. 2. https://doi.org/10.1016/j.jmapro.2010.08.002
Yang, Y. et. al. (2010). Optimization of multiple tuned mass dampers to sup-press machine tool chatter. International Journal of Machine Tools and Manu facture, Vol. 50, Nr. 9, https://doi.org/10.1016/j.ijmachtools.2010.04.011.
Jasiewicz, M. – Miądlicki, K. (2019). Implementation of an Algorithm to Prevent Chatter Vibration in a CNC System. Materials, Vol. 12, Nr. 19. https://doi.org/10.3390/ma12193193.
Dombovari, Z. et. al. (2011). On the global dynamics of chatter in the or-thogonal cuttingmodel. International Journal of Non-Linear Mechanics, Vol. 46, Nr. 1, https://doi.org/10.1016/j.ijnonlinmec.2010.09.016.
Turkes, E. et. al. (2011). Linear analysis of chatter vibration and stability for orthogonal cutting in turning. International Journal of Refractory Met-als and Hard Materials, Vol. 29, Nr. 2. https://doi.org/10.1016/j.ijrmhm.2010.10.002
Khasawneh, F. et al. (2018). Chatter Classification in Turning using Ma-chine Learning and Topological Data Analysis, IFAC-PapersOnLine, Vol. 51, Nr. 14, https://doi.org/10.1016/j.ifacol.2018.07.222.
