Engineering application of reverse engineering technology
DOI:
https://doi.org/10.32972/dms.2022.021Kulcsszavak:
digitization, scanning, optical scannerAbsztrakt
Scanners operating on the optical principle are devices for recording the phys-ical geometry of bodies suitable for non-contact measurement which work in the visible light range. These use the difference in contrasts and the strength of the reflected light for the measurement, by using the classic triangulation principle. This article focuses on re-verse engineering technologies and optical scanning process.
Hivatkozások
Zhang, Y. (2003). Research into the engineering application of reverse engineering technology. Journal of Materials Processing Technology, Vol. 139, No. 1–3, https://doi.org/10.1016/S0924-0136(03)00513-2.
Patkó, Gy. et al. (2010). A process for establishing the remanent lifetime of rolling element bearings. XXIV. microCAD International Scientific Confer-ence, Miskolci Egyetem, 2010. március 18–20.
Takács, Gy. et al. (2006). Development of Mechatronic Systems at the In-stitute for Mechatronics at the University of Miskolc. IEEE International Conference on Mechatronics, Budapest 2006. július 3–5.
Breuckmann, B. (2003). State of the art of topometric 3D-metrology. In: Grün, A., Kahmen, H. (eds.). Proceedings of the 6. Conference on Optical 3D Measurement Techniques. Vol. 2, pp. 152–158, ETH Zürich, 2003. szeptember 22–25.
