Evolutionary optimization of a transmission line tower with FPA algorithm
DOI:
https://doi.org/10.32972/dms.2021.013Kulcsszavak:
evolutionary optimization, finite element method, pylon, truss structureAbsztrakt
The optimization of the pylon is shown in this paper. The optimization is made by using flower pollination algorithm. The objective function is mass of the structure. The design constraints are static stress, local buckling and buckling. The unknowns are the typical dimensions of the circular hollow section truss. Parametric inspections have been made changing yield strength of material and the number of grid divisions. The results show that the use of higher yield strength steels, do not imply a lighter structure.
Hivatkozások
Rao, G. V. (1995). Optimum design for transmission line towers. Computers & Structures, Vol. 57, No. 1, pp. 81–92.
Silva, J. G. S., Vellasco, P. C. G., Andrade, S. A. L., Oliveira, M. I. R. (2005). Structural steel design and behaviour; Steel structures; Spatial structures; Telecommunication and transmission towers. Journal of Constructional Steel Research, Vol. 61, No. 8.
Orbán, F., Farkas, J., Jármai, K. (2011). Optimum design of a transmission line tower : Welded tubular truss structure. 6th European Conference on Steel and Composite Structures, Eurosteel 2011, Brussels.
Yang, X. S. (2012). Flower pollination algorithm for global optimization, Unconventional Computation and Natural Computation. Springer Berlin Heidelberg, Berlin.
MSZ 151-1:2000 (2000). Power overhead lines. Installation requirements for overhead lines with a nominal voltage greater than 1 kV. Magyar Szabványügyi Testület, Budapest (in Hungarian).
Páczelt, I. (1999). Finite element method in engineering practice. Miskolci Egyetemi Kiadó, Miskolc (in Hungarian).
Ferreira, A. J. M. (2009). MATLAB Codes for Finite Element Analysis. Springer Netherlands, Amsterdam.
Smith M. I.; Lee M.; Programming the Finite Element Method, 4th edition, ISBN 0-470-84969-3, John Wiley and Sons Ltd, London, 2004
EN 1993-1-1:2009; Eurocode 3: Design of steel structures - part 1-1: General rules and rules for buildings, European Committee Standardization, Brussels, 2009.
