Drag coefficient calculation of modified Myring-Savonius wind turbine with numerical simulations
DOI:
https://doi.org/10.32972/dms.2020.017Kulcsszavak:
Savonius wind turbine, Myring Equation, CFX, CFDAbsztrakt
Nowadays the importance of renewable energy is growing, and the utilization of the low wind energy potential is getting crucial. There are turbines with low and high tip speed ratio. Turbines with low tip speed ratio such as the Savonius wind turbine can generate adequate amount of torque at low wind velocities. These types of turbines are also called drag machines. The geometry of the blade can greatly influence the efficiency of the device. With Computational Fluid Dynamics (CFD) method, several optimizations can be done before the production. In our paper the Savonius wind turbine blade geometry was designed based on the so-called Myring equation. The primary objective of this paper was to investigate the drag coefficient of the force acting on the surface of the blade. Also, the Karman vortex was investigated and the space ratio of that vortex in our simulation was compared to a typical one. The power coefficient of a new Savonius turbine was investigated at different values of top speed ratio (TSR). For the sake of simplicity, a 2D cross-sectional area was investigated in the simulation with ANSYS Fluent 19.2.
Hivatkozások
Manwell, J. F., McGowan, J. G., Rogers, A. L. (2010). Wind Energy Explained: Theory, Design and Application. Vol. 2, USA, John Wiley & Sons, Ltd, 2nd edition. https://doi.org/10.1002/9781119994367
Aymane, E., Darhmaoui, H., Sheikh, N. (2017). Savonius Vertical Wind Turbine: Design, Simulation and Physical Testing. School of Science and Engineering, Alakhawany University.
Tian, W., Song, B., VanZwieten, J. H., Pyakurel, P. (2015). Computational Fluid Dynamics Prediction of a Modified Savonius Wind Turbine with Novel Blade Shapes. Energies, Vol. 8, pp. 7915-7929. https://doi.org/10.3390/en8087915
Saleh, M., Szodrai, F. (2019). Numerical Model Analysis of Myring-Savonius Wind Turbines. International Journal of Engineering and Management Sciences, Vol. 4, pp. 67-71. https://doi.org/10.21791/IJEMS.2019.1.23.
Szodrai, F. (2020). Quantitative Analysis of Drag Reduction Methods for Blunt Shaped Automobiles. Applied Sciences, Vol. 10, pp. 1-19. https://doi.org/10.3390/app10124313
Baracu, T., Benescu, S. G. (2011). Computational Analysis of the Flow Around a Cylinder and the Drag force. In: The 2nd Conference of the Young Researchers from TUCEB, At Technical University of Civil Engineering of Bucharest, Bucharest, Romania, 17-18 November 2011.
Blackwell, B. F., Sheldahl, R. E., Feltz, L. V. (1977). Wind Tunnel Performance Data for Two- and Three-Bucket Savonius Rotors. New Mexico, Sandia Laboratories. https://doi.org/10.2514/3.47966
Kulkarni, A., Harne, M. S., Bachal, A. (2014). Study of Vortex Shedding Behind Trapezoidal Bluff Body by Flow Visualization Method. International Journal of Engineering Research & Technology (IJERT), Vol. 3, No. 9, September 2014, pp. 1057-1062.
Feng, F., Li, S., Li, Y., Xu, D. (2012). Torque Characteristics Simulation on Small Scale Combined Type Vertical Axis Wind Turbine. Physics Procedia, Vol. 24, pp. 781-786. https://doi.org/10.1016/j.phpro.2012.02.116
