Investigation and optimization of the acoustic performance of Formula Student race car intake system using coupled modelling techniques
DOI:
https://doi.org/10.32972/dms.2019.002Kulcsszavak:
intake system, sound pressure level, flow modelling, pressure drop, computational fluid dynamics, optimizationAbsztrakt
The University of Miskolc has previously designed and prototyped several race cars for the Formula Student (FS) competition. Unfortunately, none of these cars utilized air intake systems meeting all the requirements of regulations. Intake system are used to feed the engine with sufficient amount of air for complete combustion inside the combustion chamber to produce maximum power. The air flow during flowing produce sound waves due to rate of turbulence and boundary layer separation, and according to standard regulation this sound should be controlled minimum as possible. Recent advances in modelling procedures for accurate performance prediction have led to the development of modelling methods for practical intake system components in commercial design. Engine designers need simple and fast modelling tools, especially in the preliminary design evaluation stages. In this study, commercial software Solidworks and advanced design software Creo 4.0 were used in addition for that Computational Fluid Dynamics (CFD) analysis is performed. Frequency domain analysis is made to receive behaviour of the entire system under assumed conditions.
Hivatkozások
Claywell, M.-Horkheimer, D.: Improvement of Intake Restrictor Performance for a Formula SAE Race Car through 1D & Coupled 1D/3D Analysis Methods. SAE 2006 Motorsports Engineering Conference & Exposition, December 2006, SAE 2006-01-3654.
Barhm Mohamad-Gábor Szepesi-Betti Bollo: Combustion optimization in spark ignition engines. MultiScience - XXXI. microCAD International Multidisciplinary Scientific Conference, 2017, ISBN 978-963-358-132-2.
Baym, B. et al.: An Experimental Approach to Design, Build, and Test a Throttle Body and Restrictor System for Formula SAE Racing. SAE 2006 World Congress and Exhibition, April 2006, SAE 2006-01-0748. https://doi.org/10.4271/2006-01-0748
Guy, R. et al.: Use of Computational Fluid Dynamics (CFD) Tools for High- Performance Engine Tuning. SAE 2006 Motorsports Engineering Conference & Exposition, December 2006, SAE 2006-01-3666. https://doi.org/10.4271/2006-01-3666
Vitek, O.-Polasek, M.: Tuned Manifold Systems - Application of 1-D Pipe Model. Modeling of SI Engines and Multi-Dimensional Engine Modeling, SAE 2002-01-0004. https://doi.org/10.4271/2002-01-0004
Barhm Mohamad-Gábor L. Szepesi-Betti Bollo: Review Article: Effect of Ethanol- Gasoline Fuel Blends on the Exhaust Emissions and Characteristics of SI Engines. Lecture Notes in Mechanical Engineering, 2018, ISBN 978-3-319-75677-6.
