Evaluation opportunities of SEM pictures by CAD software

Szerzők

  • Péter Ficzere Budapest University of Technology and Economics, Department of Vehicle Elements and Vehicle-Structure Analysis https://orcid.org/0000-0003-3207-5501
  • Norbert László Lukács Budapest University of Technology and Economics, Department of Vehicle Elements and Vehicle-Structure Analysis

DOI:

https://doi.org/10.32972/dms.2019.011

Kulcsszavak:

SEM, NURBS, Additive Manufacturing, material investigation, material properties

Absztrakt

Nowadays the different 3D printed components are often produced for direct use. In this case the components need to be mechanical designed, therefore the material properties must be well known. It is a fact that the printing parameters have a significant effect on the printing quality. The interference between the printing parameters and the mechanical solidity is well known however the reason for this phenomenon is not. For a deeper investigation a scanning electron microscope is needed. Our study is focused on the potential evaluation of results with the help of the CAD software.

Hivatkozások

Kovács N. K., Suplicz A., Kovács J. G. (2011). Gyors prototípusgyártás, mint újszerű fröccsöntő szerszámozási technológia. Műanyag- és gumiipari évkönyv, 9, pp. 45-53, 9 p.

Horváth, Á. M., Ficzere, P. (2015). Rapid prototyping in medical sciences. Production Engineering Archives/Archiwum InżYnierii Produkcji, 8, 3, pp. 28-31, 4 p.

Ficzere P., Kovács N. K., Szebényi G., Borbás L. (2019). Additív gyártástehnológiával előállított nagyrugalmasságú anyagok terhelhetőségi vizsgálata. GÉP, LXX, 1, p. 43.

Ficzere, P., Borbás, L. (2018). Experimental Investigation of the Shear Modulus in the Case of Pure Tensile Test. Transactions of Famena, 42, 1, pp. 27-36, 10 p. https://doi.org/10.21278/TOF.42103

Ficzere, P., Borbás, L. (2012). Method to reduce the independent constants of orthotrop materials in rapid prototyping. 11th Youth Symposium on Experimental Solid Mechanics, Brasov, Románia, pp. 129-135, 7 p.

Tisza M., Tóth D., Kovács P. Z. (2016). A 3D nyomtatás (FDM) paramétereinek vizsgálata, optimalizálása. GÉP, 67, 1-2, pp. 29-32, 4 p.

Ficzere P., Borbás L., Falk Gy. (2018). Additív gyártástechnológiák alkalmazhatósági vizsgálata testreszabott orvosi implantátumok méretezéséhez. Biomechanica Hungarica, 11, 2, pp. 69-75, 7 p. https://doi.org/10.17489/2018/2/10

##submission.downloads##

Megjelent

2019-11-30

Hogyan kell idézni

Ficzere, P., & Lukács, N. L. (2019). Evaluation opportunities of SEM pictures by CAD software. Design of Machines and Structures, 9(2), 20–24. https://doi.org/10.32972/dms.2019.011

Folyóirat szám

Évf. 9 szám 2 (2019): Design of Machines and Structures

Rovat

Articles