Évf. 10 szám 2 (2020): Design of Machines and Structures

##issue.viewIssueIdentification##
Megjelent: 2020-11-30

Articles

  • Thermal behaviour in CNC machine-tools

    Sebastian Cabezas, Attila Szilágyi
    5-10
    DOI: https://doi.org/10.32972/dms.2020.007

  • Thermal and structural simulations of a CNC turning centre

    Sebastian Cabezas, Attila Szilágyi
    11-19
    DOI: https://doi.org/10.32972/dms.2020.008

  • Development of desktop 3D printer

    Csaba Derekas, Dániel Kiss
    20-26
    DOI: https://doi.org/10.32972/dms.2020.009

  • Examination of possibilities of the strength modification in the case of FDM/FFF manufacturing technology

    Péter Ficzere, Norbert László Lukács
    27-34
    DOI: https://doi.org/10.32972/dms.2020.010

  • Designing of a BLDC motor bench

    Pálma Kapitány, József Lénárt
    35-40
    DOI: https://doi.org/10.32972/dms.2020.011

  • Conceptional cutting tool design for internal thread turning

    Dániel Kiss, Gergő Mihályi
    41-48
    DOI: https://doi.org/10.32972/dms.2020.012

  • Analysis of DMU40 machine centre by finite degrees of freedom

    Róbert Kiss, Attila Szilágyi
    49-53
    DOI: https://doi.org/10.32972/dms.2020.013

  • Analysis of DMU40 machine centre by CAE software

    Róbert Kiss, Attila Szilágyi
    54-58
    DOI: https://doi.org/10.32972/dms.2020.014

  • Analysis of DMU40 machine centre by vibration measurement

    Róbert Kiss, Attila Szilágyi
    59-64
    DOI: https://doi.org/10.32972/dms.2020.015

  • Demand for recycling filament in 3D printing

    Ágnes Takács, Barbara Kmetz
    65-72
    DOI: https://doi.org/10.32972/dms.2020.016

  • Drag coefficient calculation of modified Myring-Savonius wind turbine with numerical simulations

    Mahmoud Saleh, Endre Kovács
    73-84
    DOI: https://doi.org/10.32972/dms.2020.017

  • Dynamical Simulation of a CNC Turning Centre Survey Paper

    Mohammad Alzghoul, Attila Szilágyi
    85-90
    DOI: https://doi.org/10.32972/dms.2020.018

  • Dynamical Simulation of a CNC Turning Centre

    Mohammad Alzghoul, Attila Szilágyi
    91-96
    DOI: https://doi.org/10.32972/dms.2020.019

  • Research into the uses of sandblasting waste

    Ádám Sándor Pintér, Ferenc Sarka
    97-105
    DOI: https://doi.org/10.32972/dms.2020.020

  • Product development from ecodesign point of view in practice

    László Soltész, László Kamondi, László Berényi
    106-113
    DOI: https://doi.org/10.32972/dms.2020.021

  • Project management success factors: in research of product development project specialities

    László Soltész, László Kamondi, László Berényi
    114-122
    DOI: https://doi.org/10.32972/dms.2020.022

  • Brief overview of generative design support software

    Kristóf Szabó, György Hegedűs
    123-132
    DOI: https://doi.org/10.32972/dms.2020.023

  • The methods of numerical mechanics for the improvement of machine-tools

    Attila Szilágyi, Dániel Kiss
    133-144
    DOI: https://doi.org/10.32972/dms.2020.024

  • Comparison between a conventional and an antivibrating boring bar in the internal turning of long overhangs

    Thomas Wallyson, Zsombor Fülöp, Attila Szilágyi
    145-149
    DOI: https://doi.org/10.32972/dms.2020.025

  • Evaluating CBN tool life in hardened boring operations in long overhangs

    Thomas Wallyson, Zsombor Fülöp, Attila Szilágyi
    150-154
    DOI: https://doi.org/10.32972/dms.2020.026

  • Introduction of active and passive control options for hydrostatic pressure chambers

    Sándor Gergő Tóth, György Takács
    155-159
    DOI: https://doi.org/10.32972/dms.2020.027

  • Examination of machine tool slideway combined with pressure chambers

    Sándor Gergő Tóth, György Takács
    160-164
    DOI: https://doi.org/10.32972/dms.2020.028

  • A new method for production development

    Laura Trautmann, Attila Piros, János Péter Rádics, Katalin Badak-Kerti, Ivett Jakab
    165-172
    DOI: https://doi.org/10.32972/dms.2020.029